INSPECT THE PLYWOOD DECK. Deck must be constructed according to specification with the correct slope, drains, and flashings.

AL Lath Installation: Install Galvanized Lath 2.5LB- ICC approved (GML-PCS) over optional Seal Guard (LDSG6, LDSG36 or LDSG12).

Apply Base Coat: Apply base coat combining LD-1 and 1 1/4 gallon LD-81

Apply Slurry Coat: Apply slurry coat combining the desired Life Deck cement and 1 gallon LD-81 modifier.

Apply texture coat or optional patterns using LD 2, LD 3, or LD 5 cement mixed with one gallon LD 81 Modifier.

Finish Coat: Apply two thin coats of Life Deck Acrylic Concrete Masonry Color Seal (10 Series) or 28 series Cool Life Heat Reflective Coating. Optional finishes can include the 20 Series Stain, or Texture Crete Color Wash (LDCW-Color). 20 Series Stain or Color Wash System should be top coated with one of the Life Deck Clear finishes.