Preparing the surface: The surface must be free of all contaminates including dirt, grease, and oil. Before applying primer the surface should be treated to have a profile similar to 100 grit sandpaper. Refer to epoxy system specifications for complete application directions.

Patch Cracks: Use Life Deck's Epoxy Crack Patch to fill all cracks that wish to be unseen. The Crack Patch is available in a paste (LD7250K) or get (LD7200K) form and is 100% solids.

Prime Surface: Life Deck offers two types of epoxy primer coatings: water based (LD14-00K, LD25-00K) and 100% solids conventional (LD12-00K). Both provide excellent adhesion to concrete surfaces. Read over the technical data sheets to better understand which product is right for you.

Life Deck offers two types of epoxy top coats: water based (LD14-00K, LD25-00K) and 100% solids conventional (LD22-00K for colors and LD36-96K for clear). After finishing this step, you have completed the simple process of protecting and decorating your floor. There are other options, such as applying paint chips, to further decorate if you so desire. The Paint Chips (LDPC) are broadcasted into the steps before the coat dries. Then a clear coar (LD31-96K) is applied over that to protect the paint chips. Life Deck also manufactures a Chemical Resistant Urethane (LD2003) for areas such as aiplane hangars or floors that require greater chemical resistance and UV resistance.